EYDFA Optical Amplifier 1U Rack

EYDFA Optical Amplifier 1U Rack

Features

 

◆ Saturation output optical power up to 37dBm

◆ Low noise

◆ Low power consumption

◆ Three operating modes: APC, ACC, AGC

◆ Perfect Network Interface:standard RJ45 and RS232 industrial standard interface.

◆ Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port acc

  • Product Detail

EYDFA Optical Amplifier 1U Rack

 

EYDFA Optical Amplifier 1U Rack

 

The high-power EYDFA adopts a two-stage amplification structure, delivering up to 37dBm output optical power and supporting APC, ACC and AGC control modes. The unit operates reliably over a wide temperature range.

 

EYDFA Optical Amplifier 1U Rack

 

Front Panel View

 

EYDFA Optical Amplifier 1U Rack

 

Rear Panel View

 

Applications

 

  • Fiber optic sensing
  • Optical communication control systems
  • Nonlinear optics research   

 

Features

 

  • Saturation output optical power up to 37dBm
  • Low noise
  • Low power consumption
  • Three operating modes: APC, ACC, AGC
  • Perfect Network Interface:standard RJ45 and RS232 industrial standard interface.
  • Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port access.

 

Optical Characteristics

 

Product Name

EYDFA-055

Parameter

Min

Typical

Max

Unit

Operating Wavelength

1540

1550

1565

nm

Input power

-10

 

+10

dBm

Gain

32 35 38  

Output power

23   37

dBm

Input optical power threshold

  -12  

dBm

Noise figure

  5.5 6

dB

Input/output return loss

45    

dB

polarization dependent loss

    0.3

dB

Polarization mode dispersion

    0.5

ps

Operating Temperature

-5   55

℃

Humidity

5   85

%

Storage Temperature

-40   85

℃

Power consumption

    50

W

Power

-48V DC AND 220V AC

V

Interface

LC/UPC or others

 

Dimension

1U

mm

 

Oder Information

 

Product No.

Product description

EYDFA-37

EYDFA Max output 37dBm LC/UPC dual power 1U Rack

 

WARNING!

 

This device emits high-power invisible infrared laser radiation. Never look directly into optical ports or fiber end faces, and avoid skin exposure to the laser beam. High-power laser radiation may cause permanent eye injury and skin burns. It can melt plastic adapters and even ignite combustible materials. Always fit dust caps to unused optical ports promptly.

 

Want to know about this product?

SEND A MESSAGE
Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
EDFA Optical Amplifier EDFA Optical Amplifier 1U Rack
Low noise figure:typical 5.0dB High flatness: typical 1dB Cover whole C-Band: carrie 40 or 80 chs Redundancy hot swap power module: 110/220VAC and 48VDC can plug Mix Perfect Network Interface:standard RJ45 industrial standard interface and SNMP. Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port access.
EDFA Optical Amplifier EDFA Optical Amplifier Module
High output power up to23dBm Flexible control mode High stability and reliability Operating temp. -20~60°C Customizable output power and configuration
High-Power EDFA Fiber Amplifier 23dBm High-Power EDFA Fiber Amplifier 23dBm
Feature: Polarization - insensitive High stability and reliability High pump - efficiency Wide bandwidth covering C and L bands (1525 - 1565nm) Low noise figure (4 - 6dB) Low insertion loss
Integrated EDFA Amplifier Module Integrated 48/96CH DWDM EDFA Fiber Amplifier Module
In order to meet the cost-effective needs of the market, FIBERWDM has developed an integrated DWDM EDFA fiber amplifier device,Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 40/48 channels with 100 GHZ’s interval) or 80/96 channels with 50 GHZ’s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It’s an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
Managed Industrial Switch Managed Industrial Switch with 16 x Gigabit RJ45 and 2 x 1Ge SFP Uplinks
Support 2*1000Base SFP ports,16*10/100/1000M Rj45 ports Supportweb、telnet.console,SNMP v1/v2c/v3 configuration management ,remote online upgrade
800G OSFP 2xSR4 850nm 100M MPO-12 Optical transceiver 800G OSFP 2xSR4 850nm 100M MPO-12 Optical transceiver
This product is a 800Gb/s OSFP 2xSR4 optical module designed for 100m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 800Gb/s.   On the receiver side, the module converts 8 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 800Gb/s into 8 channels of 100Gb/s (PAM4) electrical output data.   An optical fiber cable with dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle.  Host FEC is required to support up to 100m fiber transmission.
Avalanche Detector APD1050H Avalanche Detector
The APD Avalanche Photodiode Detector series has basically the same usage method as the avalanche detectors of Thorlabs and Newport, with completely identical power interfaces. It can be directly replaced when the Monitor output (available on some products of Thorlabs and Newport) is not required and the bandwidth is the same, and its performance in all aspects is not inferior to similar products of Thorlabs and Newport.   Fiberwdm's APD Avalanche Photodiode Detector is fully domestically produced. Adopting an exclusive temperature compensation technical scheme, it achieves a high-sensitivity detector with high stability, high gain, and low noise over the entire temperature range (-40°C ~ 80°C). In addition to detectors with conventional specifications, customized services are also provided. Various indicators of the detector (such as supply voltage, gain, bandwidth, etc.) can be adjusted according to customer needs to meet specific requirements.   Application Fields: Laser radar, free-space optical communication, optical fiber sensing systems, optical detection systems, etc.
40G High Speed InGaAs Photodetector 40G High Speed InGaAs Photodetector
The HSPD4040 high-speed detector module is designed for both digital and analog applications. The module contains an InGaAs PIN photodiode which response wavelength covers 1250 to 1650 nm and necessary matching electronics. HSPD4040 can provide the bandwidth upto 40GHz .  The module operates on +5V. It complies with a standard single-mode 9/125μm fiber input. The RF output port is a 2.92 mm connector matched by 50 ohm impedance . HSPD4040 is hermetically sealed, and weighs less than 20 grams. ROHS 2.0 certificated . 
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact