-
How to quickly distinguish between optical transceiver and optical transceiver?
Jul 22 , 2021
Optical transceivers and optical fiber transceivers are both transmission tools that use optical fibers as carriers, and both have the function of photoelectric conversion, also called photoelectric converters. Although the two have the same functions, they are still different in nature, so many people who don’t know may be confused about what is an optical transceiver and what is a transceiver. A...
Read More
-
DWDM Multiplexer And Demultiplexer is A Wise Choice
Jul 23 , 2021
The emergence of big data requires efficient and capable data transmission speed. In order to solve the paradox of increasing bandwidth and spending less, multiplexers/demultiplexers are the best choice. This technology can transmit very large data traffic in the telecommunications network. This is a good way to deal with the bandwidth explosion from the network. Wavelength division multiplexing W...
Read More
-
Why is the 25G SFP28 LWDM transceiver used in the 5G future network?
Aug 06 , 2021
At present, 25G optical transceivers have been widely used in 5G future networks. In order to save fiber resources, a 25G WDM module is used in the 5G front drive. However, 25G WDM transceivers are much more expensive than other 25G optical modules. The 25G SFP28 LWDM transceiver can realize multi-channel signal transmission on a single fiber, and the cost is lower than that of the 25G WDM transce...
Read More
-
What is the difference between a cable and an optical cable?
Aug 12 , 2021
The cable is used to transmit electrical signals, and the inside is a copper core wire, usually a rope-like cable that is twisted by several or several groups of wires [each group of at least two]. The core wire diameter is divided into 0.32mm, 0.4mm and 0.5mm. The larger the diameter, the stronger the communication ability; and the number of core wires is divided into: 5 pairs, 10 pairs, 20 pairs...
Read More
-
What is OTN | OTN Products Manufacturer
Aug 27 , 2021
OTN (Optical Transport Network, Optical Transport Network) is based on WDM (wavelength division multiplexing) technology and introduces SDH (Synchronous Digital Hierarchy) powerful operation, maintenance, management and assignment capabilities on the basis of ultra-large transmission capacity. Make up for the lack of functions and maintenance and management overhead of SDH when facing the transpor...
Read More
-
What is the difference between CWDM technology and DWDM technology?
Sep 01 , 2021
There are CWDM coarse wavelength division multiplexing technology and DWDM dense wavelength division multiplexing technology in WDM technology. The two technologies have been specifically mentioned in the previous article. From a literal point of view, these two technologies are different in the density of a band. , But the actual technology and application are still very different. ① Different wa...
Read More
-
Introduction of 100G-QSFP28-LR4 Optical Module | Fiberwdm.com
Sep 18 , 2021
Today, 100G Ethernet technology has matured, and the deployment of 100G networks by major enterprises, institutions or governments has gradually stepped onto the right track. In the development of 100G Ethernet technology, 100G QSFP28 optical modules and 100G CFP/CFP2/CFP4 optical modules are widely used, and optical modules marked as LR4 are the most common. What is the 100G-QSFP28-LR4 optical mo...
Read More
-
Different kinds of passive optical tap
Oct 13 , 2021
A network-connected passive optical TAP usually has at least three ports: A port, B port and monitoring port. Let's take a look at the differences between them. Passive network taps in optical fiber-based networks Passive network taps can be used on fiber optic networks of all speeds-just choose a rated copy and send traffic at the same rate as your network (1 Gigabit, 10 Gigabit; 40 Gigabit, 100 ...
Read More
