-
Why 400G QSFP-DD is more popular than 400G OSFP and 400G CFP8
Oct 14 , 2022
At present, the main products of 400G transceivers are QSFP-DD, OSFP and CFP8. This article introduces: Why 400G QSFP-DD is more popular than 400G OSFP and 400G CFP8 1: QSFP-DD provides maximum port density. This makes QSFP-DD more attractive than OSFP form factor modules and larger CFP8 modules. 2: The power consumption (the maximum power that the module can dissipate without damaging the interna...
Read More
-
Application of WDM (passive wavelength division multiplexer) in 5G fronthaul
Oct 25 , 2022
Passive wavelength division multiplexer (WDM) designed to address fiber resources for long-haul transmission between distributed units (DUs) and active antenna units (AAUs) in Centralized Radio Access Network (C-RAN) 5G fronthaul architectures In addition, passive WDM can save fiber resources. In passive WDM, color optical modules are directly deployed on AAUs and DUs, and multiple AAUs can share ...
Read More
-
10G SFP+ Optical Module Features Introduction - FIBERWDM
Nov 04 , 2022
In recent years, thanks to the accelerated development of broadband networks, the application of 10G networks has become increasingly widespread. Regarding the 10G SFP+ optical module (the basic transmission equipment of the 10G network), the parameters we need to know are as follows: 1. Center wavelength (nm): There are three main types: 1) 850nm (multimode, low cost but short transmission distan...
Read More
-
Network Classification of Fiber Optic Transceivers
Nov 30 , 2022
FiberWDM is a fiber optic product manufacturer and comprehensive solution provider. Our main products include but not limited to 1x9/XFP/SFP/SFP+/25G SFP28/40G QSFP+/100G/200G/400G QSFP optical modules, CWDM/ DWDM/ AAWG devices, optical amplifiers EDFA/100G 1310 SOA/ fiber optic repeaters OEO, optical switch, network switch, also includes network packet broker, optical network OTAP for network sec...
Read More
-
How to troubleshoot and solve fiber optic transceivers?
Dec 22 , 2022
The use of fiber optic transceivers is very simple. When applying fiber optic transceivers to the network, if they cannot work normally, troubleshooting is required. The following six aspects can be used to troubleshoot and solve: 1. The power indicator light is off, and the fiber optic transceiver cannot communicate. Solution: a. Confirm whether the power cord is connected to the power connector ...
Read More
-
About DWDM Erbium-doped Fiber Amplifier
Jan 11 , 2023
In a longer fiber-optic line, DWDM Erbium-doped Fiber Amplifier are installed at specified distances for the purpose of ensuring the recovery of signals weakened by the fiber. Erbium-doped fiber amplifier EDFA can amplify any form of optical signal, and, at the same time, to recover a large number of independent WDM channel signals. However, Erbium-doped fiber amplifiers, which provide power ampli...
Read More
-
What is the difference between WDM and OTN?
Feb 17 , 2023
WDM and OTN are two different communication technologies, the differences are as follows: WDM (Wavelength Division Multiplexing): WDM is an optical transmission technology that uses optical signals of different wavelengths to multiplex multiple data streams on one optical fiber to increase the transmission capacity of the optical fiber. WDM technology combines optical signals of different waveleng...
Read More
-
What is WDM and how it works?
Mar 09 , 2023
WDM stands for Wavelength Division Multiplexing. It is a technology used in fiber optic communication networks to increase the bandwidth capacity of a single optical fiber by transmitting multiple signals simultaneously at different wavelengths. In WDM, different data signals are assigned to different wavelengths of light, which are then transmitted over the same fiber. Each wavelength is modulate...
Read More