-
What Is WDM Fiber Network?
Feb 24 , 2022
The WDM fiber network divides an optical channel into several independent channels with different wavelengths, and transmits data through a single fiber. Therefore, it provides huge bandwidth by increasing the channels on a single fiber, thereby increasing its transmission capacity. Another breakthrough technology that enables high-speed data transmission is WDM fiber optic networking or wavelengt...
Read More
-
Why Choose a 40-Channel DWDM Multiplexer/Multiplexer
Mar 04 , 2022
DWDM (Dense Wavelength Division Multiplexing) is an ideal optical multiplexing technology for long-distance data transmission, which can put multiple channel information using a single wavelength on the same fiber and greatly improve the transmission capacity of optical networks. At present, DWDM technology is widely used in telecommunication networks and has become the choice of many telecommunic...
Read More
-
What is Dense Wavelength Division Multiplexing
Mar 08 , 2022
The so-called dense is relative to the interval between two adjacent wavelengths. In the past, the wavelength interval of the wavelength division multiplexing system was several tens of nanometers. Now the wavelength interval is only 02 to 1.2 nm. The spectrum allocation is shown in Figure 2-1. DWDM technology is actually a specific form of wavelength division multiplexing. Generally, the waveleng...
Read More
-
What is a fiber optic transceiver? What is the function of fiber optic transceiver?
Mar 25 , 2022
What is a fiber optic transceiver? Optical fiber transceiver is an Ethernet transmission media conversion unit that interchanges short-distance twisted-pair electrical signals and long-distance optical signals. It is also called a fiber converter in many places. The product is generally used in the actual network environment where the Ethernet cable cannot be covered and the transmission distance ...
Read More
-
Point-to-point 20-channel 100G DWDM QSFP28 55KM transmission - Fiberwdm.com
Apr 21 , 2022
With the explosion of network data flow, 100G transmission has begun to be widely used. At present, the traditional 100G/200G coherent optical DWDM CFP/CFP2 transmission solution is expensive and has a long lead time;FIBERWDM Ruid Ele-tech has launched a non-coherent 100G DWDM QSFP28 transmission solution through various efforts and cooperation, which has a good cost advantage in 100G short-distan...
Read More
-
What is a CWDM/DWDM multiplexer/demultiplexer?
May 20 , 2022
As we all know, WDM (Wavelength Division Multiplexing) is a technology that uses multiple lasers to send multiple lasers of different wavelengths on a single fiber at the same time. It can realize two-way communication on one fiber and increase network capacity. In a WDM system, a multiplexer is generally used at the transmitting end to multiplex several optical signals into a bundle of optical ca...
Read More
-
Introduction of 100G DWDM QSFP28 CS Connector PAM4 Transceiver
Jun 09 , 2022
What is PAM4? PAM4 is a technology that uses four different signal levels for signal transmission, and each symbol period represents 2 bits of logical information (0, 1, 2, 3). By transmitting two bits in one symbol slot, PAM4 cuts the signal bandwidth in half. With half the bandwidth, PAM4 can achieve 50Gb/s data transfer in a 25Gb/s electrical tolerance environment. Additionally, PAM4 minimizes ...
Read More
-
Advantages of WDM wavelength division multiplexing
Jun 20 , 2022
In the whole WDM system, the optical wavelength division multiplexer and the demultiplexer are the key components in the WDM technology, and their performance plays a decisive role in the transmission quality of the system. Advantages of WDM wavelength division multiplexing High capacity An important feature of WDM is that it can make full use of the bandwidth resources of optical fibers to increa...
Read More
