China 200G 400G DCI supplier

1 x N Multipath Channel Switch Device

  • Optical transmission system
  • LAN light source/detector auto exchange and optical sensor monitoring system
  • Optic fiber, Optical passive components, Optical network and cable testing

 



  • Product Detail

1 x N  Multipath Channel Switch Device

 

Product Overview

 

Multipath Channel Switch Device (1 x N switch) is used for selecting and controlling optic path. It has an important role in the optical communication and applies to multipoint monitoring of optical transmission system, LAN light source/detector auto exchange and optical sensor monitoring system. It also can be used for optic fiber, optical passive components, optical network and cable testing.

 

Mechanical Optical Switch Application

 

  • Optical transmission system
  • LAN light source/detector auto exchange and optical sensor monitoring system
  • Optic fiber, Optical passive components, Optical network and cable testing

 

 

 

(Flow control, Internet behavior management, industrial computer)

 

 

Features

 

 

  • Low insertion loss and fast switching
  • With LCD display and key panel
  • Control more than one device at a time through serial port
  • Baud rate setting of serial communication according to the actual situation

 

 

Equipment Performance

 

Parameters

Units

Norm

 

Insertion Loss

 

dB

1<N≤12

16<N≤32

32<N≤64

64<N≤128

Typ:0.8 Max:1.0

Typ:1.0 Max:1.2

Typ:1.4 Max:1.6

Typ:1.9 Max:2.2

Wavelength Range

nm

532~980; 1260~1650

Test Wavelength

nm

650/780/850/980;1310/1490/1550/1625/1650

Return Loss

dB

SM≥50/MM≥30

Crosstalk

dB

SM≥55/MM≥35

PDL

dB

≤0.05

WDL

dB

≤0.25

TDL

dB

≤0.25

Repeatability

dB

≤±0.02

Durability

Cycles

107

Output Transmit Power

mW

≤500

Switching Time

ms

≤10(adjacent channel)

Operating Temperature

-20~+70

Storage Temperature

-40~+85

Power Supply

V

AC 85-264V,50/60Hz or DC(36-72)V

Dimensions

mm

1U W303×D439×H44 (≤16 channels) or customize

2U W303×D434×H89 (≤130 channels) or customize

Want to know about this product?

SEND A MESSAGE
Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
1x2 Fiber Optical Switch 12 Channel 1×2 Optical Switch
Features Low insertion loss, Fast switching. RS232 Control and Ethernet RJ45 Management. The serial port adopts RS-232 female interface. Optical path switching can be controlled through buttons, serial ports, and network ports. And it can be operated by locking the keys through instructions.
1x2 fiber optical switch 4 Channel 1×2 Optical Switch
Features Low insertion loss, Fast switching. Optical switch internal circuit self-detection, fault alarm notification. RS232 Control and Ethernet RJ45 Management. LED display panel. Visual display, Convenient operation. Optical path switching can be controlled through buttons, serial ports, and network ports. And it can be operated by locking the keys through instructions.
Optical node line protector Intersection Surveillance Node Optical line protector FW-OLPB
Product features Automatic switching no human intervention required. Switching when the protected equipment loses power. Reduce various losses caused by network node failures. Increase the reliability of transmission networks. Support manual and automatic switching selection. Large screen LCD display. Equipped with sound and light alarms. Wide range dual power input DC+5V TO+36V. Rail mounted installation.  
100Channel 1×2 100Channel 1×2 Optical Switch
  Features Low insertion loss, Fast switching. Ethernet RJ45 Management RS232 Control Management Independently controls each optical switch optical path
DCM Dispersion Compensation Module DCM dispersion compensation Module board
DCM dispersion compensation Module: 10~100KM DCM
10G XFP Transceiver XFP 10G DWDM 80km Transceiver
Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 80km over single mode fiber DWDM EML laser transmitter APD Receiver 100GHz ITU Grid, C Band Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V, +5V Temperature range 0°C to 70°C Power dissipation: <3.5W RoHS Compliant Part Applications: 10GBASE-ER/EW Ethernet SONET OC-192 /SDH 80km 10G FC DWDM Networks Transceiver Types:
Data Center Network Switch 48x25GE port and 8x 100Ge uplink Port DS410 Data Center Network Switch 48x25GE port and 8x 100Ge uplink Port DS410
Product Features 1.Performance Ports: 48 x10/25GE, 8 x 40/100GE 2/3 layer wire speed forwarding 40G/100G port: Supports 4x10G/4x25G mode 2. Data center optimization design Each port supports a virtual output queue Hot swappable power supply with 1+1 redundancy design 4+1 redundantly designed hot-swappable fan modules Easy to install 3. High performance controller x86 architecture COM-e modules Supports 16GB DDR4 memory with ECC Support 256GB SSD solid state drives, M.2 interface (SATA bus) Support for BMC, through which peripherals can be monitored and managed 4. The system supports the monitoring and recording functions of various events Voltage monitoring, support board level voltage monitoring Temperature monitoring Restart reason log
16ch 100G DWDM MUX DEMUX Dual Fiber 16CH C41-C56 DWDM MUX DEMUX LGX
IL<3.5dB , 100GHZ DWDM MUX DEMUX Multiplexing of 16 Channels over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact